喷码机模板

Air separation equipment in air as raw material, through the method of compression cycle deep freezing air into liquid, then after rectification and gradually from the liquid air separation to prod...

Two stages of the compressor are suitable for high pressure and one stage is suitable for large gas production. Sometimes, you need more than two compressions, so why do you need hierarchical compr...

The main engine is the core part of the air compressor, which is in high-speed operation state for a long time, similar to most operating machines, and it must be carried out preventive overhaul af...

The main factors that should be considered in the selection of bearings are as follows: the bearings of various structural types can be adapted to different operating conditions due to their differ...

1, the environment temperature is too high on the screw air compressor caused by high temperature this mainly from two aspects to affect the air compressor.A: the higher the temperature is, the thi...

Main cold explosion mechanism1. Dangerous substancesA. Combustible components: mainly hydrocarbon compounds such as acetylene, acetylene is the most dangerous. Its solubility in liquid oxygen is ve...

With the rapid development of domestic coal chemical projects, the design, installation, operation and maintenance of large internal compression process air separation equipment are being continuou...

Installation requirements are as follows:1) cold box valve shall be installed after all containers are in place and before pipeline installation.2) the cold valve in the cold box should be installe...

The application prospect of air separation equipment in food industry is very broad, and it plays an important role in food processing and preservation. Air separation equipment uses molecular siev...

The raw air is inhaled from the suction tower, and dust and other mechanical impurities are removed by the air filter.After filtration, the air is compressed to about 0.52Mpa in the centrifugal air...